User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
42
-
If the connection type provided by the upstream router is dynamic IP address, the new router
obtains connection information from the upstream router automatically. If the connection type is
static IP address, you need to set the connection information manually.
-
In mode WISP, if the LAN IP address of the new router is in the same network segment as that of the
upstream router, an IP conflict occurs. In this case, the new router replaces its LAN IP address with
an IP address which belongs to another network segment. Then log in to the web UI of the new
router using tendawifi.com.
-
In Client+AP mode, the LAN IP address of A10/AC10U changes and you can view the new IP address
from the DHCP client list of the upstream router.
6.4 Channel & Bandwidth
6.4.1 Overview
This module allows you to change network mode, WiFi channel, and WiFi bandwidth of either 2.4 GHz or 5 GHz
WiFi network. Please retain the default channel and bandwidth settings if you set without professional guidance.
To access the configuration page, click WiFi Settings > Channel & Bandwidth.
Parameter description:
Parameter
Description
Network
It specifies various protocols adopted for wireless transmission. You are recommended to keep
the default settings. For 2.4 GHz networks, 11b/g mixed, 11b/g/n mixed, and 11n protocols are