User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
47
6.6.2 Connect devices to WiFi network using WPS
-
Smart phones can connect to the WiFi network of the router through WPS only when they support
WPS function.
-
Desktops or laptops can connect to the WiFi network of the router through WPS only when they are
installed with wireless adapters. For detailed information, please refer to the user guide of relevant
wireless adapter.
Method 1: Setting through the web UI of the router
1. Click WiFi Settings > WPS.
2. Click Click Here. Then the router’s WiFi LED indicator on the front panel is blinking slowly.
3. Set WPS on a smart phone or computer installed with wireless network adapter within 2 minutes.
--End
Smart phones or computers are connected to the WiFi network of the router successfully after a while.
Method 2: Setting via the WPS button on the router
1. Press the WPS button on the router.
2. Set WPS on a smart phone or computer installed with wireless adapter within two minutes.
--End
The smart phone or computer is connected to the WiFi network of the router successfully after a while.
Method 3: Setting through pin code of the router
WPS connection using pin code is generally applied on computer with wireless adapter. Please refer to
relevant adapter’s user guide for detailed instructions.