User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
52
The following figure shows the wireless transmission when Beamforming+ is enabled.
6.7.2 Setting Beamforming+
To access the configuration page, click WiFi Settings > Beamforming+. By default, Beamforming+ function is
enabled. You are recommended to retain the default settings.
6.8 AP Mode
6.8.1 Overview
In AP mode, the router implements the functions of wireless access point (AP), and WAN port of the router
functions as a LAN port. Usually, in AP mode, when the router connects to the upstream router using an Ethernet
cable, the router extends the wireless network coverage of the upstream router, or transforms the wired signal to
wireless one.
To access the configuration page, click WiFi Settings > AP Mode. By default, AP mode is disabled.