User Manual

56
7 Guest Network
7.1 Overview
This module makes you able to enable/disable the Guest Network function and change guest network’s WiFi
name and password.
Devices connected to the guest network can access to the internet and communicate with each other, but cannot
access the router’s web UI or the master network. This function not only enables guests to access the internet
but also ensures the security of the master network.
To access the configuration page, click Guest Network. By default, the Guest Network function is disabled.
Parameter description:
Parameter
Description
Guest Network
Used to enable the Guest Network function. By default, this function is disabled.
2.4 GHz/ 5 GHz
WiFi Name
It specifies the WiFi name of the router’s guest network. By default, Tenda_VIP is for 2.4
GHz WiFi network and Tenda_VIP_5G for 5 GHz WiFi network.
You can change the SSIDs if required. To distinguish the guest network from the master
network, you are recommended not to set the same name for these two networks.
Guest Network
Password
It specifies the password for the router’s two guest networks. Please set the password
according to your requirements.