User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
64
Parameter description:
Parameter
Description
PPTP Server
Used to enable/disable the PPTP server function. If the function is enabled, the router
functions as a PPTP server.
IP Address
Pool
It specifies the range of IP addresses that the PPTP server can assign to users.
MPPE
Encryption
Used to enable/disable the MPPE encryption function.
User Name
Set user name and password that is allowed to dial in the PPTP server. This name and
password are needed when a device connects to the PPTP server.
Password
Connection
Status
It specifies the status of a VPN connection.
Operation
The following operations can be performed on the PPTP user rules:
-
+New: It is used to add PPTP users. Users can access the PPTP server successfully after you
have added them.
-
: It is used to disable PPTP users to access the PPTP server.
-
: It is used to enable PPTP users to access the PPTP server again if they were disabled
before.
-
: It is used to delete PPTP users.
9.1.2 Example
Scenario
Michael bought an AC10/AC10U for network. And he needs to access the resources of his FTP server at home.