User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
65
Solution
The PPTP server function of AC10/AC10U can address this requirement. Set PPTP Server function on the router.
He can access the resources on the computer’s FTP server by VPN dialing up on business trip.
Assume that the IP address of the FTP server is 192.168.0.104, and the WAN IP address of the router is
113.88.112.220. After the PPTP server function of the router is enabled, the WAN IP address becomes the
address of the PPTP server.
Procedures:
1. To access the configuration page, choose VPN > PPTP Server.
2. PPTP Server: set to .
3. IP Address Pool: Set the range of IP addresses that the PPTP server assigns to devices. You are
recommended to keep the default settings.
4. MPPE Encryption: Set to , and configure the number of MPPE encryption bits, which
is 128 in this example.
5. User Name, Password: Set user names and passwords that devices use for VPN dialing up, which are
admin1 in this example.
6. Click +New.
7. Click Save.
--End
Verification (Example: Windows 7)
On business trip, Michael succeeds in accessing resources on his computer’s FTP server at home. The following
describes the steps: