User Manual
Table Of Contents
- 1 Introduction
- 2 Set up to access the internet
- 3 Web UI description
- 4 Internet Status
- 5 Internet Settings
- 6 WiFi Settings
- 7 Guest Network
- 8 Parental Control
- 9 VPN
- 10 USB App
- 11 Advanced Settings
- 12 System Settings
- Appendixes
92
Parameter description:
Parameter
Description
Sleeping Mode
Used to enable/disable the Sleeping Mode function..
When the router is in Sleeping mode, you can enable the WiFi network function by pressing
the WIFI button on the rear panel of the router or using Tenda WiFi app. For details about
how to enable this WiFi network function by Tenda WiFi app, refer to the usage of the app.
Sleeping Time
It specifies the time when the Sleeping Mode function is effective.
Delay
-
When Delay enabling the Sleep mode when there is an online user option is selected, if
device (s) exchange(s) data with the router in a WAN speed of no more than 3KB/s within
30 minutes, the router enters Sleeping mode; if no device exchanges data with the router,
and the traffic is less than 3 KB/s within 3 minutes, the router enters Sleeping mode.
-
When the Sleeping Mode function is enabled and the Delay enabling the Sleep mode
when there is an online user option is not selected, the router enters Sleeping mode
during Sleeping Time automatically.
11.4 LED Control
This page allows you to set on/off status of the router’s LED indicators.
To access the configuration page, click Advanced Settings > LED Control.