User Guide

- 26 -
---End
Verification
Verify that the WiFi network is inaccessible during 23:00 to 07:00 every day while accessible
during the rest of the time.
Note
To enable the WiFi function during the downtime, press the WiFi On/Off button on the back panel of the
router. This button is the preferred means to control the function. Alternatively, you can enable the WiFi
function by disabling the WiFi function schedule on the WiFi Schedule page.
3.3.3 Wireless Repeating
The wireless repeating function enables a wireless router or an AP to function as a wireless
repeater to extend wireless network coverage. At least two wireless routers are required for
implementing this function. You can use this router to extend wireless network coverage in
WISP or Client+AP mode.
Note
If wireless repeating is enabled, the Sleeping mode, IPTV function, guest network, WPS function, Tenda
App function, and WiFi function schedule become unavailable. For details, refer to the message on the
router web UI.
Application Scenario
User A subscribes to an 8 Mbps broadband service and purchases a wireless router for setting
up an LAN with internet connectivity in his 100 square meters apartment, which has three
bedrooms, one dining room, one living room, two restrooms, and one kitchen. The router is
placed in the living room. The WiFi signals are strong in the living room and master bedroom,
but too poor in the other bedrooms and the restrooms to access the internet.