User Guide

- 67 -
Configuration
Step 1 Log in to the router web UI, choose VPN > PPTP/L2TP Client.
Step 2 Set PPTP/L2TP Client to the state.
Step 3 Set Client Type based on the type of service that you subscribe. In this example, set it to
PPTP.
Step 4 Set MPPE Encryption and MPPE Encryption Bits based on the service that you subscribe. In
this example, set MPPE Encryption to the state and MPPE Encryption Bits to 128.
Step 5 Set Server IP/Domain Name, User name, and Password based on the information provided
by the ISP.
Step 6 Click Connect.
---End
Remote Access
You can access the resources on the ISP's VPN server through the router.
3.8 Advanced Settings
The router provides advanced settings to address tailored requirements.