User Guide

2
I Get to Know the Adapter
3 LED/Interface/Button
LED
Color
Status
Description
Power
/
Off
The device is NOT receiving electrical power.
Green
Solid
The electrical power is on.
Green
Slow blinking
The device is in power saving mode.
PLC
/
Off
The device doesn’t pair with other powerline devices, or is
powered off.
Green
Solid
The device is connected to a powerline network.
Green
Fast blinking
The device is pairing with a powerline devices.
Red
Solid
The powerline signal of the adapter is poor; try plugging the
adapter closing to your router or modem until the PLC LED
turns to green.
Ethernet
/
Off
No Ethernet cable is detected on the Ethernet port.
Green
Solid
The Ethernet cable is connected properly.
Interface/Button
Description
Ethernet Port
For connecting to the Internet, a computer, or other network devices via an Ethernet
cable.
Pair
Press and hold it for about 1 second to start pairing.
Press and hold it for about 6 seconds (the Power LED will be off and then light up
again) to restore the adapter to factory default.
Ethernet LED
PLC LED
Power LED
Ethernet Port
Pair Button