Product specifications

Wireless AC1200 ADSL2+ Dual Band Modem Router
17
2. Advanced Setup
2.1 Layer2 Interface
Click Advanced Setup > Layer2 Interface to enter the Layer2 Interface screen.
This modem router provides two Layer2 Interfaces:
- ATM Interface for ADSL broadband Internet service. (By default, system applies the ATM Interface (ADSL uplink).)
- ETH Interface for connecting to the Internet via an Ethernet cable.
 If you directly connect to the ADSL line via a phone cable, first refer to 2.1.1 To set up the ATM interface and then
skip to 2.2.1 For ATM Interface
 If you connect to the Internet via a fiber/cable modem using an Ethernet cable, first refer to 2.1.2 To set up the ETH
interface and then skip to 2.2.2 For ETH Interface.
2.1.1 To set up the ATM interface
 Select ATM Interface and click Add to configure it.
 Enter the VPI and VCI values. Select a DSL Link Type (Internet connection type): EoA, PPPoA or IPoA. Leave
other options unchanged from factory defaults. Click Apply/Save.