Product specifications

Wireless AC1200 ADSL2+ Dual Band Modem Router



Here you can view your configurations. When the IPoE connection is successful, you can access the Internet.

 Steps 1~7 above for IPoE and IPv4 Only users

-------------------------------------------------------------------------------------------------------------------------------

5) IPoE IPv4&IPv6 (Dual Stack) Users

If your ISP uses DHCP to assign your IP address or if your ISP assigns you a static (fixed) IP address, IP subnet mask

and the gateway IP address, you need to select the IP over Ethernet (IPoE).

After you configure the ATM Interface (ADSL uplink) and select EoA as the DSL link type, you can start to set up

WAN service for accessing the Internet.

 Click Advanced Setup > WAN Service and then click the Add button.

 Select the ATM interface you added just now from the pull-down menu in the figure below. Click Next.