User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
Status
Description
The WiFi function is enabled.
The WiFi function is disabled.
6.2 WiFi Name and Password
In this part, you can change the WiFi name, security mode, and WiFi password.
Parameters
Parameters
Description
WiFi Name
It specifies the wireless network name. When the router is connected to the internet
successfully, wireless clients, such as smart phones, can connect to this name for internet
access.
Hide WiFi
When this option is selected, the wireless clients cannot search the WiFi name of the router,
and you need to enter it on your device manually.
Security Mode
It specifies the security mode of the wireless network.
None: A wireless client can connect to the wireless network without a password.
WPA-PSK: The wireless clients can only use WPA-PSK security mode to connect to the
wireless network.
WPA2-PSK: The wireless clients can only use WPA2-PSK security mode to connect to the
wireless network.
WPA/WPA2-PSK Mixed: The wireless clients can use WPA-PSK or WPA2-PSK security
mode to connect to the wireless network.
WiFi Password
It specifies the wireless password of the wireless network. To secure the wireless network,
you’d better set a password for your wireless network.
Changing WiFi Name and WiFi Password
Step 1 Choose Wireless Settings to enter the page.