User Guide
Table Of Contents
- 1 Get to Know Your Device
- 2 Quick Internet Setup
- 3 Layout
- 4 Status
- 5 Internet Settings
- 6 Wireless Settings
- 7 Bandwidth Control
- 8 MAC Address Filter
- 9 IP-MAC Binding
- 10 Port Forwarding
- 11 DDNS
- 12 DMZ Host
- 13 UPNP
- 14 Administration
- Appendix
Click OK on the dialog box that appears.
It is recommended that you reset the router only when you forget your login password or Tenda
technical support asks you to do so.
Ensure that the power supply of the router is normal when the router is reset.
Resetting the router deletes all your customized settings. Therefore, you can access the internet
only after reconfiguring the router.
Reset the Router Using the Reset Button
Hold on the WPS/RST button of the router for about 8 seconds and release the button when all the LED
indicators blink once.
Backup/Restore a Configuration File
This function enables you to back up the current configuration of the router to your computer. After the
configuration is changed, you can use the backup file to restore the configuration of router. This saves router
configuration time.
To back up or restore the configuration of your router, choose Administration > Device Management and
perform either of the following procedures.