Manual

Wireless N300 Home Router
12
3. If "Connecting" is displayed and no WAN IP address is seen, try
refreshing the page five times. And if it still displays
"Connecting" try steps below:
1). Contact your ISP for assistance if you are using the DHCP
connection type.
2). Read the connection diagnostic info on WAN status.
Note:
Below diagnostic info will be displayed on particular occasions for
your reference:
1). You have connected to Internet successfully.
2). You might have entered a wrong user name and/or a wrong
password. Please contact your ISP for the correct user name and
password and enter them again.
3). Ethernet cable is not connected or not properly connected to the
WAN port on the device. Please reconnect it properly.
4). No response is received from your ISP. Please verify that you can