Manual
Table Of Contents
- Chapter 1 Product Overview
- Chapter 2 Installation and Quick Setup Guide
- Chapter 3 Advanced Settings
- Chapter 4 Wireless Settings
- Chapter 5 Bandwidth Control
- Chapter 6 Special Applications
- Chapter 7 Security
- Chapter 8 Tools
- Appendix 1 Glossary
- Appendix 2 FAQs
- Appendix 3 Remove Wireless Network from Your PC
- Appendix 4 Safety and Emission Statement
Wireless N300 Home Router
35
3.5 WAN Medium Type
The device supports two WAN medium types: wired and wireless.
Select Wired WAN if you need to connect to your ISP via an Ethernet
cable or select Wireless WAN if you directly connect to your WISP
wirelessly. The default WAN Medium Type is Wired WAN, so no
settings are required here if you connect to your ISP via an Ethernet
cable. If you connect to your WISP wirelessly, do as follows:
1. Select Wireless WAN and enable the scan feature.