Manual

Wireless N300 Home Router
62
4.2 Wireless Security
This section allows you to secure your wireless network and block
unauthorized accesses and malicious packet sniffing. To encrypt
your wireless network, do as follows:
1. Select the wireless network (SSID) you wish to encrypt.
2. Disable WPS. (WPS is enabled on the router by default. If
you want to use other security modes, you must first disable
the WPS.)
3. Select a proper security mode and cipher type (also known
as WPA Algorithm or WPA Encryption Type). WPA-PSK and
AES are recommended by system default. (5 security
modes are available for your selection. Among them,
WPA-PSK outstands with greater compatibility and security.
For more information of other security modes, see appendix
2) Specify a security key that includes at least 8 characters.
4. Click OK to complete your settings.