Manual

Wireless N300 Home Router
86
7.2 MAC Filter
This section allows you to set the times specific clients can or cannot
access the Internet via the devices’ MAC Addresses.
Forbid Only (or Forbid or Deny): Specify a list of devices to
Forbid (Deny) access to Internet. All other devices not listed as
Forbidden (Denied) will be permitted.
Permit Only (or Permit or Allow): Specify a list of devices to
Permit (or Allow) access to Internet. All other devices not listed as
Permitted (or Allowed) will be forbidden.
1. Filter Mode: Select a proper filter mode, say, Forbid Only (or
Forbid/Deny).
2. Access Policy: Select an access policy number, say, 1, from
the drop-down list.
3. Policy Name: Briefly describe the current rule (It can only
consist of numbers, letters, or underscore).
4. MAC Address: Specify a MAC address for a corresponding MAC
filter rule to apply to.
5. Time: Specify a time period for a current rule to take effect. If
the field is set to 0:00-0:00, the rule will be applied 24hrs/day.