Product specifications

300Mbps Concurrent Dual Band Wireless N Router

Operation Instructions

PBC: If you find the WPS LED blinking for 2 minutes after you press the hardware

WPS button on the device, it means that PBC encryption method is successfully

enabled. And an authentication will be performed between your router and the

WPS/PBC-enabled wireless client device during this time; if it succeeds, the wireless

client device connects to your device, and the WPS LED turns off. Repeat steps

mentioned above if you want to connect more wireless client devices to the device.

PIN：To use this option, you must know the PIN code from the wireless client and

enter it in corresponding field on your device while using the same PIN code on

client side for such connection.

Note: The WPS encryption can be implemented only between your Router and

another WPS-capable device.

4.5.4 WDS Settings

WDS (Wireless Distribution System) feature can be used to extend your existing

2.4G or 5G wireless network coverage. Here we present you how to config such

feature in 2.4GHz, which also apply to 5GHz.

Select Repeater Mode to display below page:

 AP MAC Address: Enter the MAC address of a wireless link partner or populate

this field using the Open Scan option.

 WDS Mode: Select Disable or Repeater Mode.