Product specifications

Concurrent Dual Band Wireless N600 Gigabit Router

4.5.8 Wireless –Advance Settings

This section allows you to config advanced settings, including Beacon interval，

Fragment threshold，RTS threshold and DTIM interval, etc, for both 2.4G and 5G

wireless networks.

 AP Isolation: Isolates clients connecting to the private SSID.



Beacon Interval: A time interval between any 2 consecutive Beacon packets sent

by device. Do NOT change the default value of 100 unless necessary.



Fragment Threshold: Enter a Fragment Threshold (256-2346). Any wireless

packet exceeding such set value will be divided into several fragments. DO NOT

change the default value of 2346 unless necessary.

 RTS Threshold: If a packet exceeds such set value, RTS/CTS scheme will be

used to reduce collisions. Set it to a smaller value provided that there are distant

clients and interference. For normal SOHO, it is recommended to keep the default

value unchanged; otherwise, device performance may be degraded.



DTIM Interval: A time interval between any two consecutive broadcast and multicast

packet messages sent by the device to clients. W

hen such packets arrive at device’s

buffer, the device will send DTIM (delivery traffic indication message) and DTIM

interval to wake clients up for receiving these packets.