User guide

TEG1210P 10-Port Gigabit Intelligent PoE Switch User Guide
IP Config
Allows you to set switch’s management IP and
VLAN, etc
Restore Factory
Default
Allows you to restore factory default settings
Backup Allows you to backup switch’s current settings
Restore Allows you to restore previous settings
Warm Restart Allows you to restart the switch
System
Setting
Logout
Allows you to log out from switch’s web based
configuration interface
3.2 System Information
To enter the following page, click “System Information”.
This page displays the switch’s system parameters which are described as below:
Field Description
Hardware Version Switch’s hardware version
Firmware Version Switch’s firmware version
VLAN Mode Displays the current VLAN mode
DHCP Client Displays DHCP client status; by default, the feature is disabled
IP Address Switch’s IP address: 192.168.0.1 by default, through which
- 15 -