User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
90
Only APs of the same model can be upgraded in batch.
Step 4 Click Browse on the pop-up window, select and upload the firmware that has been
downloaded to your computer.
Step 5 Click Upload. Wait until the progress bar completes.
---- End
10.2.2
Reset the APs
When resetting, do not power off the AP.
Step 1 Click AP Management > AP Settings to access the configuration page.
Step 2 Select APs you want to reset. You can reset APs one by one, or select multiple APs to reset
them in batch. Click the Reset button.