User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
94
Advanced settings 10.3
This function is available only when the AP Management function is enabled on the AP Management >
Basic Settings page.
In this section, you can set up advanced settings for the APs.
To access the configuration page, choose AP Management > Advanced Settings. See the following
figure:
Parameter description
2.4 GHz Advanced Settings / 5 GHz Advanced Settings
Parameter
Description
Country/Region
Country or region where this device is located. You can select the country or region
to ensure that this device complies with the local regulations.
Network Mode
Specify the channel in which the AP operates. Select one idle channel for less
interference. Auto indicates that this device automatically changes to a channel
rarely used in the ambient environment to prevent interference.
Available options for 2.4 GHz band: 802.11b, 802.11g, 802.11b/g, and 802.11b/g/n
(default).
Available options for 5 GHz band: 802.11a, 802.11ac (default), and 802.11a/n mixed.