User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
96
Parameter
Description
multimedia packets. By default, this function is enabled.
APSD
It specifies whether to enable the Automatic Power Save Delivery (APSD) mode.
APSD is a WMM power saving protocol created by Wi-Fi Alliance. Enabling APSD
helps reduce power consumption. By default, this mode is disabled.
Deployment Mode
It specifies the deployment mode of the router. This parameter is valid only for 2.4
GHz networks. Select a mode that conforms to your application scenario. Available
options:
- Default: This option is a balance between Coverage-oriented and
Capacity-oriented.
- Coverage-oriented: This mode applies to scenarios that the network
environment is complex, users are scattered, and the interference is weak.
- Capacity-oriented: This mode applies to scenarios that the area is open and
crowded with users and the interference is strong.
Global Settings
Parameter
Description
Ethernet Mode
Select the Ethernet mode for the PoE port of the AP. Available options:
- Standard (default): This mode features a high data rate but short transmission
distance.
- 10 Mbps Full Half Duplex: This mode features long transmission distance but low
data rate. Generally, the negotiated speed is 10 Mbps.
If the Ethernet connecting the LAN port of the AP to the peer device is longer than
100 meters, this mode is recommended. In this case, ensure that the peer device
adopts auto negotiation mode.
LED Indicator
Used to turn on/off the LED indicators of this device.
Reboot Schedule
Select the reboot schedule mode for the AP. Available options:
- Disable (default).
- Reboot Schedule: the AP reboots at the specified date and time.
- Reboot Interval: the AP reboots every interval.