User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
101
2. Set the required parameters.
3. Click Save.
---- End
Added successfully. See the following figure:
11.3.2 Example of configuring MAC address filter rule(s)
Networking requirement
An enterprise uses the router to set up a LAN to address the following requirement:
During business hours (08:00 to 18:00 on weekday), only the purchaser is allowed to access the
internet. Assume that the MAC address of the purchaser’s computer is CC:3A:61:71:1B:6E.
Solutions
The MAC address filter can meet this requirement.
Configuration procedure
Step 1 Set up a time group.
1. Choose Filter Management > IP Group/Time Group.
2. Set a time group shown in the following figure.