User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
103
IP address filter 11.4
This is a time group-related function. You can create IP address-based rules to decide whether or
not clients can access the internet through the router during certain period of time.
11.4.1 Configure the IP address filter
Before you start
Set up at least one time group rule.
Set up at least one IP group rule.
To make IP address-based filter rules always take effect, specify a static IP address for the
clients.
Configuration procedure
Step 1 Choose Filter Management > IP Address Filter.
Step 2 Enable this function, and click Save.
Step 3 Configure IP address filter rule(s).