User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
106
Step 4 Set IP address filter rule(s).
1. Choose Filter Management > IP Address Filter.
2. Enable this function, and click Save.
3. Click +Add. The Add window appears.
4. Set required parameter, and click Save.
5. Deselect Allow clients with disabled status or clients not on the list to access the internet
through this device.
6. Click Save at the bottom of the page to apply your settings.
---- End
Verification
During 08:00 to 18:00 on weekdays, only the purchaser’s computer can access the internet.