User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
111
URL filter 11.6
An URL filter prevents LAN users from accessing specified types of website and controls internet
accessibility of LAN users so that they will not spend time on websites irrelevant to their duties.
Before you add web filter rules, add web categories.
To access the following page, choose Filter Management > URL Filter. By default, this function is
disabled. Once it is enabled, the following page appears.
11.6.1 Configure URL filter
Before you start
Set up at least one time group rule.
Set up at least one IP group rule.
Configuration procedure
Step 1 Enable URL Filter.
1. Choose Filter Management > URL Filter.
2. Enable this function, and click Save.
Step 2 Customize URL library.
1. Click the URL Management button. The URL Management configuration page appears.