User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
123
Parameter description
Parameter
Description
Current MAC
It specifies the MAC address the router currently used.
Default MAC
It specifies the MAC address of the router itself.
- You can view the MAC address of the router on
LAN port status page, or the Label on
the bottom of your router.
- If you clone the local host MAC, the MAC address of the router is changed to the
MAC address you cloned.
Clone Local Host
MAC
It specifies the MAC address of the computer that can access the internet normally.
To use this option, you need to keep the computer with internet connectivity connected
to the router and disconnect all the other computers. Otherwise, find the correct MAC
address, and enter it manually. You can consult your ISP as well.
Manual
It allows you to manually specify a MAC address.
Clone MAC address
Step 1 Click More > WAN Parameters, and locate the corresponding WAN port.
Step 2 Select one option, or manually specify the MAC address according to your actual situation.
Step 3 Click Save to apply your settings.
---- End
12.2.5
Fast NAT
NAT (Network Address Translation) translates private addresses in intranet to global (public)
addresses to achieve communication between the intranet and the internet. While fast NAT enables
the router forward the traffic from the specific LAN to the chosen WAN directly. This function
reduces the CPU loading and speed up the performance of the NAT sessions.
You are recommended to keep fast NAT enabled.