User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
126
In the route table, the record where Destination Network and Subnet Mask are 0.0.0.0 indicates
the default route of the router. If no route exactly matching the destination address of a packet is
found in the route table, the router uses the default route to forward the packet. The route
containing the gateway IP address 0.0.0.0 is a direct route, which means that the destination
network is directly connected to the router using the port specified in the route.
If a static route conflicts with a user-defined multi-WAN policy, the static route prioritizes.
12.3.3 Example of configuring static route
Network requirement
An enterprise uses the router for network construction. The internet is inaccessible to the
enterprise LAN. The WAN1 port of the router accesses the internet using a PPPoE connection and
the WAN2 port of the router accesses the enterprise LAN using a dynamic IP address. Users on the
router LAN are allowed to access both the internet and enterprise LAN. Assume that the PPPoE user
name and password are tenda/tenda.
Solutions
The static routing function can address this requirement.
Configuration procedure
Step 1 Configuring multiple WAN ports.
Refer to Configure multiple WAN ports to configure the WAN1 port to PPPoE and WAN2
port to Dynamic IP. See the following figure:
Switch
Router
Internal gateway
LAN IP: 192.168.98.1
172.16.100.0/24
LAN IP: 192.168.0.252