User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
132
Manage your router remotely using web UI 12.5
12.5.1
Overview
Generally, the web UI of the router can only be accessed on devices that are connected to the
router in wired or wireless manner. This costs in case of seeking technician to fix network problems.
The remote web management function is designed to address such requirement. When you
encounter network faulty, you can ask technician far away to diagnose and fix your problems,
improving efficiency and reducing costs and efforts.
Choose More > Remote WEB Management, and enable this function, the configuration page
appears. See the following figure:
Parameter description
Parameter
Description
Remote IP
IP address of the computer that can access the router remotely.
- Any IP: Any computers can access the router over the internet. Choose this option
only when necessary since it lowers network security.
- Specified IP: Only a computer with the specified IP address can access the router
over the internet. If the computer is on a LAN, enter the WAN port IP address of the
gateway of the computer.
Remote Access
Address
With this function enabled, the router automatically generates one unique domain
name that can be used to manage the router remotely.
12.5.2 Conifgure remote web management
Step 1 Click More > Remote WEB Management, and enable this function.
Step 2 Select the WAN port for remote access.
Step 3 Set the Remote IP to either of Any IP or Specified IP.