User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
137
Parameter
Description
Password
It specifies the password used to log in to a DDNS provider.
Domain Name
It specifies the domain name obtained from a DDNS provider.
Status
It specifies the DDNS service status.
12.6.2 Configure DDNS
A dynamic IP address will disable the port forwarding rule. To use this function and make the rule -
always effective, set a static IP address for the specified local host.
Some programs, such as firewall, antivirus software, and security guard, may hinder internet users -
to access the local service. Disable them when necessary.
Step 1 Choose More > DDNS, locate the WAN port and enable the function.
Step 2 Set required parameters.
Step 3 Click Save to apply your settings.
---- End