User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
3
2 Quick setup
This chapter introduces how to set up the router to access the internet for the first time.
Step 1 Connect your router.
1. Connect the included power adapter to the Power jack of the router to power it on.
2. Use an Ethernet cable to connect an Ethernet jack or a LAN port of your modem to the
WAN port of the router.
3. Either connect your computer to a LAN port of the router, or connect your WiFi-enabled
device, such as a smart phone, to the wireless network of the router.
The default SSID is on the bottom Label of the router. By default, it has no WiFi password.
Step 2 Configure your router.
You can perform quick setup either using a connected computer or a smart phone. The -
configuration process is the same. The following takes a computer for example.
If a smart phone is used, disable its mobile or cellular network function. -
1. Start a web browser on the computer connected to the router or the wireless network of
the router, and access tendawifi.com.