User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
148
12.8.3 Example of configuring DMZ host
Networking requirement
An enterprise uses the router to deploy its WLAN network. The router is connected to the internet.
Now the enterprise establishes a web server and wants to enable its employees to access the web
server through the internet.
Solutions
You can use the DMZ function to meet this requirement.
Configuration procedure
Step 1 Choose More > DMZ Host, and enable this function of the corresponding WAN port.
Step 2 Enter the IP address of the DMZ Host.
Step 3 Enable Filter VPN Port as required.
Router
Internet user
Web server
IP: 192.168.8.217
WAN1 IP: 202.105.11.22