User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
149
Step 4 Click Save to apply your settings.
---- End
Verification
Internet users can use http://202.105.11.22:80 to access the web server. Among which:
- http indicates intranet service protocol name.
- 202.105.11.22 is the WAN1 IP address.
- 80 is the external port number.
In addition, If the corresponding WAN port is configured with DDNS, you can use intranet service
protocol name://domain name:external port to access the web server.
If you cannot access the web server, try the following methods to resolve the problem: -
Make sure that the WAN IP address of the router is a public IP address. -
Make sure that the intranet port number is the service port number on the local host. -