User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
150
UPnP 12.9
UPnP is short for Universal Plug and Play. After you enable this function, the router can detect
UPnP-based application programs on local computers and map onto the ports of the programs
automatically. In this way, internet users can access these programs. It is generally used for P2P
programs, such as BitComet and AnyChat, and helps to increase the download speed.
By default, this function is disabled. Choose More > UPnP, and enable this function, the following
figure appears.
If you enable the UPnP function, when UPnP-based programs, such as BitComet and AnyChat, are
running on the local network, the external and internal mapping relationships are displayed on the
page.