User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
153
IP attack defense
Parameter description
Parameter
Description
IP Timestamp Option
It is used to block IP packets that contain the Internet Timestamp option.
IP Security Option
It is used to block IP packets that contain the Security option.
IP Stream Option
It is used to block IP packets that contain the Stream ID option.
IP Record Route Option
It is used to block IP packets that contain the Record Route option.
IP Loose Source Route
Option
It is used to block IP packets that contain the Loose Source Route option.
Rouge IP Option
It is used to block IP packets that fail to pass integrity and correctness check.
Packets meeting the above features may not be used for malicious attack. Therefore, enable attack
defense as required.
Block WAN ping
With this function enabled, users cannot ping the WAN IP address of the router over the internet.