User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
155
Parameter
Description
Max. Users
It specifies the maximum number of VPN clients allowed to be connected to the PPTP/L2TP
server. The value is fixed to 32.
User Name
It specifies the user name and password used to dial in a PPTP/L2TP VPN connection.
Password
Network Users
It specifies the password for the user name used to dial in PPTP/L2TP VPN connection.
Network
Segment
It specifies whether a VPN client is a network.
- Yes: The network segment and subnet mask of the VPN client are required.
- No: The VPN client is a computer.
Subnet Mask
It specifies subnet mask of the LAN of a VPN client in case that the client is a network.
Remark
It specifies a short description about the corresponding account.
You are recommended to add a remark to your VPN account for later management.
Status
It specifies whether or the corresponding rule is enabled.