User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
164
Clicking Advanced loads the following configuration area:
Parameter description
Parameter
Description
Period 1/2
It specifies the two periods that the IKE SA (IKE Security Association that is broken down.
The router does not support IKEV2.0.
Mode
It specifies the mode that IPSec ends use to exchange information in Period 1.
- Main: This mode requires double messages to be exchanged in Period 1, which provides
higher security but lower efficiency.
- Aggressive: This mode requires half of messages to be exchanged in Period 1, which
provide lower security but higher efficiency.
Encryption
Algorithm
The router supports the following algorithms:
- DES (Data Encryption Standard): A 56-bit key is used to encrypt 64-bit data. The last 8
bits of the 64-bit data are used for parity check.
- 3DES: Three 56-bit keys are used for encryption.
- AES (Advanced Encryption Standard): AES 128/192/256 indicates that 128/192/256-bit
keys are used for encryption respectively.
Integrity
Verification
The router supports the following algorithms to check key integrity:
- MD5 (Message Digest Algorithm): A 128-bit message digest is generated to prevent
message tampering.
- SHA1 (Secure Hash Algorithm): A 160-bit message digest is generated to prevent