User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
170
Step
Task
Description
4
Verify the connectivity
between the VPN server
and VPN client
Check if VPN connection is established and access HQ LAN resources
using VPN.
Configuration procedure
Step 1 Configure Router_HQ as a VPN server.
1. On Router_HQ, choose More > VPN Server, enable this function, and click Save.
2. Set Client Type to PPTP.
3. Set the egress port of the VPN server for setting up a tunnel with the VPN client, which is
WAN1 in this example.
4. Set Encryption to Enable.
The peer VPN client should use the same configuration.
5. Click Save.
Step 2 Configure a PPTP/L2TP user on Router_HQ.
1. On Router_HQ, choose More > VPN Server, and move to the PPTP/L2TP User module.
2. Click +Add. The Add configuration window appears.