User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
171
3. Set the required parameters. The following shows the examples:
Remark is optional. However, you are recommended to add a brief description of the rule for
convenient management later, which is Branch_01 in this example.
4. Click Save.
Added successfully. See the following figure:
Step 3 Configure Router_Branch as a VPN client.
1. On Router_Branch, choose More > VPN Client, and enable this function.
2. Set required parameters. The parameters should keep consistent with the VPN server.
Client Type: PPTP Client
WAN: WAN1
Server IP Address/Domain Name: 202.105.11.22