User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
172
User name/Password: Branch_HQ/12345678
Remote LAN: 192.168.6.0
Remote Subnet Mask: 255.255.255.0
3. Disable VPN Proxy.
4. Click Save to apply your settings.
---- End
Verification
Step 1 Check if the VPN connection is established.
There are two methods for checking whether or not the VPN connection is established.
Method 1:
Log in to the web UI of Router_HQ, choose More > VPN Sever, and move to the PPTP/L2TP
User module, there is a squared tip Online next to the user name, indicating the VPN
connection is established.