User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
176
Key negotiation method: Auto Negotiation
Pre-shared key: 12345678
Step 1 Configure Router_HQ the IPSec connection.
1. Choose More > IPsec, and click +Add, the configuration page appears.
2. Set required parameters.
(1) Select the WAN port enabled with IPSec, which is WAN1 in this example.
(2) Select Tunnel from the Encapsulation Mode drop-down list menu.
(3) Customize a Connection Name, which is IPSec_1 in this example.
(4) Remote Gateway: Enter the WAN IP address of its peer Router_Branch, which is
202.105.88.77 in this example.
(5) Local LAN/Prefix Length: Enter the LAN network segment/subnet mask of Router_HQ
in the defined format, which is 192.168.1.0/24 in this example.
(6) Remote LAN/Prefix Length: Enter the LAN network segment/subnet mask of its peer
Router_Branch in the defined format, which is 192.168.0.0/24 in this example.
(7) Select Auto negotiation from the Key Negotiation drop-down list menu, and
customize the Pre-shared Key, which is 12345678 in this example.
3. Click Save.