User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
189
3. Tap Add VPN Configuration.
4. Set required parameters.
(1) Set Type to L2TP.
(2) Set Description to the name of the VPN connection, which is HQ in this example.
(3) Set Server to the IP address of L2TP server, which is 192.168.20.62 in this example.
(4) Set Account to the user name used to connect the VPN client to the VPN server,
which is Tom in this example.
(5) Set Password to the password for the user name, which is Tom123 in this example.
(6) Set Secret to the Pre-shared Key set in IPsec connection, which is 87654321 in this
example.
(7) Tap Done.
5. Tap .