User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
197
Upgrade 13.2
13.2.1
Overview
The router supports local and online upgrades.
Choose Maintenance > Upgrade to enter the configuration page. See the following figure:
13.2.2 Upgrad the rotuer manually
To enable your router to work properly after an upgrade, ensure that the firmware used to -
upgrade complies with your
Model.
When upgrading, do not power off the router. -
Step 1 Download the upgrade file to your local computer.
1. Visit www.tendacn.com, searching the Model in the searching bar to enter the product
details page.
2. Locate the latest firmware, download it to your computer, and unzip it.
Step 2 Log in to the web UI of your router, click Maintenance > Upgrade to enter the
configuration page.
Step 3 Set Upgrade Option to Local Upgrade.
Step 4 Click Browse, select and upload the firmware that has been downloaded to your computer.