User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
198
Step 5 Click Upgrade. Wait until the progress bar completes.
If upgrade does not apply, reset the router. Back up your configurations properly before reset.
13.2.3 Upgrad the rotuer automatically
When the router is connected to the internet, it checks whether there is a later firmware version,
and displays the detected information on the page. You can choose whether to upgrade the
firmware with the latest version. If you want to upgrade the firmware, click Upgrade. Then the
system will download the firmware and the router upgrades the firmware automatically.