User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
205
Step 6 Click Start.
---- End
Wait a moment. The ping result will be displayed in the result box. See the following figure:
13.7.3 Execute Traceroute command to detect the route
selection
Assume that:
You need to detect the path from the router to Bing website.
Step 1 Click Maintenance > Diagnosis Tool to enter the configuration page.
Step 2 Select Traceroute from the drop-down list menu of the Tools menu.
Step 3 Enter the IP address or domain name of the traceroute target, which is cn.bing.com in this
example.