User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
207
System time 13.8
13.8.1
Overview
This function is used to set the system time of your router. To make the time-related functions
effective, ensure that the system time of the router is set correctly.
The router supports:
Synchronize with internet time (default)
Set system time manually
To access the configuration page, click Maintenance > System Time. See the following figure:
13.8.2 Synchronize with internet time
With this method, the router automatically synchronizes its system time with the network time
server (NTS). As long as the router is connecting to the internet, the system time is correct.