User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
208
Parameter description
Parameter
Description
Sync Interval
It specifies an interval at which the router synchronizes its system time with the time
server on the internet. By default, the router performs synchronization every 0.5
hours.
Time Zone
It specifies the time zone where the router is deployed.
After configuration, navigate to the System status page to check whether it is synchronized.
13.8.3 Set system time manually
With this method, you can manually specify a system time for the router. When Manual option is
selected, the related parameters are shown as follows.
With this method, you need to manually reconfigure the system time each time the router reboots.
Parameter description
Parameter
Description
Date
Manually enter the date and time as needed.
Time
Sync with Local PC
Time
It allows you to synchronize the system time of the router with the system time of the
management computer.
Click this button, the router auto-fills the system time of your management
computer.
After configuration, navigate to the System status page to check whether it is synchronized.