User Guide
Table Of Contents
- 1 At a glance
- 2 Quick setup
- 3 Login
- 4 System status
- 5 Internet settings
- 6 Wireless
- 7 Address reservation
- 8 Bandwidth control
- 9 Authentication
- 9.1 Overview
- 9.2 Configure captive portal
- 9.3 Example of captive portal
- 9.4 User management
- 10 AP mangement
- 11 Filter management
- 12 More settings
- 12.1 LAN settings
- 12.2 WAN parameters
- 12.3 Configure static route
- 12.4 Port mirroring
- 12.5 Manage your router remotely using web UI
- 12.6 DDNS
- 12.7 Port forwarding
- 12.8 DMZ host
- 12.9 UPnP
- 12.10 Any IP
- 12.11 Security settings
- 12.12 VPN server
- 12.13 VPN client
- 12.14 IPSec
- 12.15 Example of configuring VPN conenctions
- 12.16 Multi-WAN policy
- 13 Maintenance
- Appendix
16
Manage online devices 4.3
To access the configuration page, click the Connected Devices icon on the System Status page.
The Bandwidth Control and Blacklist window appears.
You can edit the name of connected clients, control the connected clients’ upload and/or download
bandwidth separately or in batch, and block a device from accessing your network.
Parameter description
Parameter
Description
Host Name
It specifies the name of clients connected to the router, connection type, their IP
addresses, and MAC addresses. You can click to personalize the host name for
convenient management.
For host name-based rules, you need to use the host name here.
: The client connects to the router in a wired manner.
: The client connects to the router’s 2.4 GHz wireless network.
: The client connects to the router’s 5 GHz wireless network.
Concurrent Sessions
Concurrent sessions established of the corresponding client.
Upload Bandwidth
It indicates the real-time upload/download bandwidth of each client. You can control
their maximum upload/download bandwidth manually, refer to
Manage online
devices.
Download Bandwidth
Total Download
It specifies the total download traffic utilized by each client.
Uptime
It specifies the connection time of each client. The unit is minute.